1️⃣ Dilute 1:15 for light cleaning such as routine vehicle maintenance or light grime.

2️⃣ Increase concentration up to 1:10 for heavy-duty cleaning on plant machinery, lorries, or vehicles with built-up road film.

3️⃣ Apply the alkaline traffic film remover to all exterior areas including paint, plastic, rubber, and glass using a sprayer, foam applicator, or pressure washer.

4️⃣ Allow 2–3 minutes of dwell time to break down traffic film and road contaminants.

5️⃣ Rinse thoroughly with clean water or jet wash until all residue is removed.

How to use traffic film remover?

APT’s Traffic Film Remover (TFR), Truck Wash 205 is a professional, super-concentrated commercial traffic film remover that is used on all vehicles, equipment, plant, and engine parts. This fast-acting formula. To use Truck Wash 205 to clean your commercial fleet vehicles, we recommend for tough grime or plant equipment, dilute up to 1:5, for lighter soiling, 1:15 is typically effective. Adjust based on application and soiling level. Using a low pressure, apply Truck Wash 205 all over the vehicle, then switch to high pressure, beginning at the bottom and remove all the traffic film. Finally, we suggest giving the vehicle a final rinse with water to allow the gloss finish.

What is traffic film remover used for?

APT’s Truck Wash 205, Traffic Film Remover (TFR) is a super-concentrated, fast-acting, specialised formula that breaks down the most stubborn traffic film, grease and oil build up on commercial vehicles. This the best truck wash available on the market for cleaning all fleet vehicles, equipment, plant, and engine parts. Whilst many TFR’s claim to be non-damaging, it’s often reported that they can cause damage to paintwork and the materials that they are being used upon. However, Truck Wash 205 is different, paintwork is always maintained, and it even leaves a protective finish to reduce static dirt, grease, and oil build up.

What is truck wash?

Truck Wash 205 is a professional traffic film remover is a super-concentrated pressure washer commercial truck detergent and TFR traffic film remover that is designed with controlled foam levels, and it is safe to use to use on all paintwork types. Truck Wash 205 provides an effective cleaning and degreasing all of fleet vehicles to reduce dirt build up on the exterior of vehicles, equipment, plant, and engine parts. Whilst many TFR’s claim to be non-damaging and safe to use, Truck Wash 205 safe to use on all paintwork types, safe for the individual to use and it is also environmentally friendly and completely biodegradable. We whole heartedly believe that it’s not only important to provide time and cost-effective products that do what they say on the tub, but also to ensure that we are reducing our carbon footprint and positively impacting our environment.

How to wash a truck?

Using Truck Wash 205 couldn’t be simpler, with no training or specific clothing and equipment being required. We recommend to either use hot steam or cold pressure washing. When cleaning all brands of cars, vans, lorries, tankers, curtain-sided vehicles, and all other commercial vehicles the best way of using Truck Wash 205 is to use high pressure cleaning. Using Truck Wash 205 in a high-pressure cleaner to remove the most traffic film, grease, and oil build-up on commercial vehicles, whilst also being the perfect remover of light grease in the engine compartment. This is also a highly effective product used for pre-MOT testing on chassis and under-body areas.

How long should I leave Truckwash 205 on the surface before rinsing?

Allow 2–3 minutes, this gives the active ingredients time to break down contaminants. Don’t allow the product to dry before rinsing.